Parasound JC3 Phono Vorverstärker für MM- und Moving Coil- Tonabnehmer. Dreifach geschirmtes Netzteil. RCA und balanced XLR Outputs, Monoschalter. B438mm x H105mm x T350mm, 2U Rack Mount Kit HRA 2 separat erhältlich,
Parasound JC3+ Features
- Designed by John Curl - creator of the legendary Vendetta Research phono preamp
- Inputs and outputs use Vampire brand 24k gold-plated RCA jacks
- Balanced outputs use Neutrik brand premium XLR jacks
- MM 47k ohm, MC 47k ohm or MC variable 50-550 Ohms
- RIAA accurate within 0.2 dB
- Exclusively Vishay-Dale resistors in the audio path
- Triple shielding; low-carbon mild steel partitions isolate the power supplies & AC wires
- Dual mono design; each audio channel is separately enclosed in its own extruded aluminum enclosure
- Separate high speed-soft recovery rectifiers, filter caps and voltage regulators for each channel
- Superior R-core type power transformer
- Mono switch can improve sound of mono and older LPs
- Built-in AC line conditioner to prevent AC noise from polluting the circuits
- AC polarity reverse switch can reduce hum in many systems
- Non-magnetic aluminum rear panel for purest sound
- Turn On Options switch: manual or auto with 12v trigger input
- Premium detachable heavy gauge IEC AC cord
- 2u Chassis, rack mountable with HRA2 (sold separately)
How the JC 3+ improves on the original JC 3:
- Variable MC load adjust independent for each channel from 50-550 ohms with dual gang potentiometers specially made for Parasound by Vishay.
- Curl-Thompson tweaked circuits to further reduce the JC 3 silent background noise.
- 24k gold plated copper traces on phono module boards for utmost conductivity and most transparency/detail in the music.
- 47% larger low ESD power supply filter caps greater reserve for head-snapping dynamics.
- 82% larger R-core power transformer greater reserve for more low end impact.
- Ability to turn off illumination of the front panel P logo.
- Now Available in Silver or Black.
Parasound JC3+ Technische Details
Frequency Response
20 Hz - 20 kHz, +/- 0.2 dB
Total Harmonic Distortion
< 0.01% at 1 kHz
Signal to Noise Ratio, MM
> 87 dB, input shorted, IHF A-weighted
> 78 dB, input shorted, unweighted
Signal to Noise Ratio, MC
> 87 dB, input shorted, IHF A-weighted
> 67 dB, input shorted, unweighted
Interchannel Crosstalk
72 dB at 1 kHz
Input Impedance
MM: 47k Ω
MC: 50 - 550 Ω variable, 47k Ω fixed
Output Impedance
Unbalanced: < 100 Ω
Balanced: < 100 Ω per leg
Input Capacitance
150 pF
Input Sensitivity at 1 kHz
MM: 4mV for 1 V output
MC: 600µV for 1 V output
Total Gain
MM: 48 dB
MC: 64 dB
XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)
AC Power Requirement
Standby: 1 watt
Power On: 12 watts
115 or 230 VAC 50 - 60 Hz
(Selected on Chassis Bottom)
Dimensions
Width: 17-1/4" (437mm)
Depth: 13-3/4" (350mm)
Height, with feet: 4-1/8" (105mm)
Height, without feet: 3-1/2" (89mm)
Weight
Net: 19 lbs. (8.6 Kg)
Shipping: 26 lbs. (11.8 Kg)
Rack Mount Accessory
HRA 2 (may be purchased separately)
- Wenn du dich für eine Auswahl entscheidest, wird die Seite komplett aktualisiert.
Dein Warenkorb
Dein Warenkorb ist leer
Hast du ein Konto?
Logge dich ein, damit es beim Checkout schneller geht.